Panels From Us
• Fast Order Processing
• Experienced & Knowledgeable Staff
• Secure Packing and Order Checking
• Unmatched Stamping and Tooling
• Tried and Tested Fit to Vehicle
• Superior Part Definition/Body Lines
ISO 9001 CERTIFICATION
Our rust repair panels are manufactured under the rigid guidelines
of ISO 9001. The extent of this certification includes organizational
processes used in manufacturing, testing, and quality assurance.
Our adherence to these guidelines and our commitment to continuous
improvement ensures that our customers will receive the highest
quality products and superior service.
The rust repair panels that we distribute are
determined through an intensive process. The process begins
with obtaining an OEM truck or car body. A vehicle study is
performed to not only determine where it is rusting, but where
it will continue to rust as the area spreads over the lifetime
of the Truck, Van or SUV. After the problem areas are identified,
the vehicle section is reverse engineered and a part is carefully
designed with critical dimensions. A physical part is then cut-out
of the actual OEM vehicle as a visual reference for test-fitting
and used to acquire a 3D scan image of the part. The image used
with CAD (computer-aided design) will then be applied to the
production of the die and tooling equipment to ensure the accuracy
of part dimensions, body lines, and contours. Upon completion
of production equipment, sample parts are produced and test-fitted
onto actual vehicles for both appearance and proper fit. At
this point, the test-fit process continues until an accurate
part is assured whereby it will go into manufacturing production
after a final series of cross-checks. Remember, not all parts
need to replace the entire OEM section. In many cases we offer
several non-OEM options. For instance, on truck bedsides depending
upon your need and the extent of the problem - you can purchase
the entire OEM replica bedside or non-OEM full wheel arch section,
partial wheel arch section, or just the front/rear bed sections.
In defining the problem areas, we offer parts that replace an
entire OEM section or simply offer a lower-cost solution to
just the trouble areas.
To achieve a level of quality that is equal to or better than
the OEM body section of the vehicle that is being repaired -
we only use 19 gauge or higher steel for our panels. The highest
grade steel available is used for our parts as well. Furthermore,
our plants use "all-steel" dies and tooling which
produces cleaner body features and enables us to use a thicker
gauge of steel.
From AutoCAD design development to computer-driven
robotic production equipment, the factories that produce our
rust repair panels use the latest advancements in technology
to design, develop, and manufacture the finished product. Most
of these facilities have been built within the last 5 years
and long after the worldwide technology boom which allowed production
plants to be constructed with technology in mind. New robotic
equipment for stamping/tooling/finishing, laser guidance, and
plasma-cutting provides for a level of stricter tolerances and
accuracy. With these factory innovations, it enables us to use
high-grade steel of heavier gauge than many other manufacturers.
This all equates to making a superior quality part for our customers.
THE LETP ADVANTAGE
• Quality Assurance:
The parts we distribute are manufactured under the rigid guidelines
of International ISO 9001 Standards in modern high-tech production
plants. Most other manufacturers don't follow these quality standards
guidelines or use old technology.
||Advantage: Top quality
production process is maintained.
|• Engineering Design:
LETP parts stamping forms are engineered & produced to the precise
specifications of the original part or design. Strict computer-checked
interface tolerances are adhered to without exception. Many others
are manufactured to be simply "close-enough" using only
human inspection requiring the end-user to make parts fit.
||Advantage: Superior fitting parts
with consistency maintained.
|• Die Stamping:
Our rust repair panels are die-stamped to exactly match the characteristics
such as body lines/definition of the original equipment manufacturer's(OEM)
part. The presses and forms are continually monitored for stress,
position, pressure, and accuracy at each stage. Some other manufacturers
don't practice these rigid procedures.
||Advantage: Makes installation accurate,
quick & easy.
|• Steel Gauge:
LETP rust repair panels are made from the highest gauge steel possible
with each part. These meet or exceed the gauges of the OEM parts.
A lot of other manufacturers use lighter gauges of steel to save
on costs but can cause installation issues.
||Advantage: No buckling, warping,
wrinkling, or stress lines.
|• Product Testing:
Our parts are tried and tested on actual vehicles until both the
"mechanical" and "visual" fit are correctly
produced. Some manufacturers claim to test directly on vehicles
but merely perform visual tests or use photo references.
||Advantage: No worries about how the
part will actually fit or whether contour & body curves line
up from a visual perspective.
Our parts duplicate the OEM flanges, lips, and other connections
to minimize installation problems. There are no rough or jagged
edges on non-OEM parts. Necessary specs are laser measured. Many
other parts from different manufacturers require the end-user to
deal with rough or jagged edges.
||Advantage: No major installation
or safety issues and virtually no hand-tooling work required.
Our parts are designed to accurately fit the vehicle area of repair
with nobody fit adjustments necessary. No press brake formation
is used. The majority of others require some bending, forming, and/or
manipulation of the part.
||Advantage: No installation adjustments
or hand-beating needed.
Our parts are made to not only cover the typical rust area but to
extend beyond that area to insure a clean repair and allow enough
overlapping metal to connect with the existing vehicle structure
before welding. A lot of other designs do not cover enough overlap
allowing adjacent rust areas to migrate over to the repaired section
||Advantage: No concerns about impending
PAINTED parts - The latest Electro-Deposit Primer(EDP) finish process
is used, subjecting the parts to a heavy coating of high quality
black primer upon being thoroughly cleaned and prepped.
CHROMED parts - A Triple Nickel chrome process is used which is
the most proven available. It provides a durable finish with deep
reflective properties. Other manufacturers fail to clean the parts
properly before applying primer or just leave the steel unprotected
||Advantage: No primer flaking, no
oil residue, and minimal scuffing of the surface required prior